 Instruction for upgrade DL2.pdf | Some instruction for use with upgrade of DL2 systems using the SKIPPER service software. It is important that the software version in the screen and the electronic unit match. If you are replacing 1 unit , check you have the same software version, and if not update the older part. | |
| LICENSE.lgpl-2.1.pdf | SKIPPER software uses a number of Open source programs, under license type LICENSE.lgpl-2.1. This file explains and clarifies the use of the software under this license. | |
 SW for DL2 1.2.1.2 (HF) w manuals.zip | Software SW-M004/5 1.2.1.2 (26.09.2022) with following changes: fix of problem with acknowledge and rebooting after upgrade Software SW-M004/5 1.2.1.1 (07.09.2022) with following changes: fix of "NO COMMUNICATION" fix of memory leak (restart of display/JB) Note: There is a chance this upgrade may require a Factory reset of the system, we recomend you note the calibration settings before upgrading Software SW-M004/5 1.2.1.0 with following changes: fix of ALR alarm fix of n: in UDP (LAN) coms addition of EPV for simulation and standby and reverse fix of diagnostic test, calibration status text, reset. Software SW-M004/5 1.2.0.0 with IEC62923(2018) Size 36MB. This package includes a new more stable upgrader and is recomended. To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times. BAM Alerts compliant, alerts changed to be warnings. all can be individually disabled. New manual also avaialble. - Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality SW-M004/5-1.1.2 - div bug fixes Added Ground total and trip, with low integrity if bottom is lost No communication fixes (due to multiple clocks or long input messages) Patch 1 (1.1.2.1) Parallel screens functions bug fix on older displays/OS Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04) Last Update 26.09.2022 | |
 Older Versions | ||
| DL2 Software version 1.0.13 patch 4 23.08.2016 with manuals.zip | ||
| DL2 Software version 1.0.13 patch 4 23.08.2016.zip | Software version 1.0.13 (Patch 4) for DL21 & DL2, Fixes to allow the DL21 DL2 part to work in SOG only mode, also improves STW values to be within spec. Contains SW-M005-1.0.13.4 for CU-M001-xx Display, SW-M004-1.0.13.4 for JB70, SW-M006-2.14 for sensor. Changes of 1.0.13.2 to 1.0.13.4 stabilise the system with high NMEA input loads. | |
| SW for DL2 1.1.1.8 (HF) w manuals NEW UPGRADER.zip |
Software version 1.1.1 for DL2 with high frequency - MUST BE USED WITH SERVICE SW V >1.91
- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes latest version 1.1.1.8 03.03.2020 Patch 8 : Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality Package contains: 1) SW M004 for DL2 JB70 Unit, 2) SW M005 Graphic Display CU-M001-xx 3) SW M006 FW for DL2 Sensor with high frequency for sensor SN > 170373 | |
| SW for DL2 1.1.1.8 (HF) w manuals OLD UPGRADER.zip |
Software version 1.1.1 for DL2 with high frequency - MUST BE USED WITH SERVICE SW V <1.90
- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes latest version 1.1.1.8 03.03.2020 Patch 8 : Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality Package contains: 1) SW M004 for DL2 JB70 Unit, 2) SW M005 Graphic Display CU-M001-xx 3) SW M006 FW for DL2 Sensor with high frequency for sensor SN > 170373 | |
| SW for DL2 1.1.2.1 (HF) w manuals NEW UPGRADER.zip |
Software version 1.1.1 for DL2 with high frequency This package includes a new more stable upgrader and is recomended.
To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times. - Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality Latest version 1.1.2 - div bug fixes Added Ground total and trip, with low integrity if bottom is lost No communication fixes (due to multiple clocks or long input messages) Patch 1 (1.1.2.1) Parallel screens functions bug fix on older displays/OS Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04) | |
| SW for DL2 1.1.2.1 (HF) w manuals OLD UPGRADER.zip | Latest version 1.1.2 with old upgrader, (to be used with service software <1.92) Recomend use with new upgrader for better upgrade stability - div bug fixes Added Ground total and trip, with low integrity if bottom is lost No communication fixes (due to multiple clocks or long input messages) Patch 1 (1.1.2.1) Parallel screens functions bug fix on older displays/OS Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04) | |
| SW for DL2 1.2.0.0 (HF) w manuals NEW UPGRADER IEC62923.zip | Software SW-M004/5 1.2.0.0 with IEC62923(2018) Size 36MB. This package includes a new more stable upgrader and is recomended.
To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times. BAM Alerts compliant, alerts changed to be warnings. all can be individually disabled. New manual also avaialble. - Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality Latest version 1.1.2 - div bug fixes Added Ground total and trip, with low integrity if bottom is lost No communication fixes (due to multiple clocks or long input messages) Patch 1 (1.1.2.1) Parallel screens functions bug fix on older displays/OS Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04) Last Update 28.8.2021 | |
| SW for DL2 1.2.1.0 (HF) w manuals.zip | Software SW-M004/5 1.2.1.0 with following changes: fix of ALR alarm fix of n: in UDP (LAN) coms addition of EPV for simulation and standby and reverse fix of diagnostic test, calibration status text, reset. Software SW-M004/5 1.2.0.0 with IEC62923(2018) Size 36MB. This package includes a new more stable upgrader and is recomended. To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times. BAM Alerts compliant, alerts changed to be warnings. all can be individually disabled. New manual also avaialble. - Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors), - Patch 2 for Total & Trip error (double distance error in previous versions) - Patch 3 fix of loss of STW when passing North heading. Patch 7 new filter and frequency changing algorithm and variuos bug fixes Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending. remove off as screen dimming level, bug fixes on config saving, Incoming ALF/ACN and gui texts removal of -0.0 possibility for better use with IR300 improvements in sensor upgrade functionality SW-M004/5-1.1.2 - div bug fixes Added Ground total and trip, with low integrity if bottom is lost No communication fixes (due to multiple clocks or long input messages) Patch 1 (1.1.2.1) Parallel screens functions bug fix on older displays/OS Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04) Last Update 4.11.2021 | |
| Windows Version | ||
| DL2 Windows SW M005-1.2.0.0 (BAM version).exe | ||
| DL2 Windows SW M005-1.2.0.0 (BAM version).rar | ||
| SW M005 1 1 3 0 for windows.rar | ||
| SW M005 WIN R1.1.2.1.rar | ||
| SW M005 WIN ver 1 1 1 7.zip | ||
| Windows drivers.rar | Windows version of display decompress the drivers into a folder on your PC, then copy into that folder the software .exe you require, and start the .exe from within the folder (or via a shortcut) | |
| DL2 Windows SW M005-1.2.1.2 (BAM version).tar | ||
| DL2 Windows SW M005-1.2.1.2 (BAM version).zip |